published date : feb 23, 2008 drawing no : sdsa6224 v1 checked : b.l.l iu p.1/4 part number: ZM2CR55W-3 3.2x1.6mm smd chip led lamp www.sunled.com preliminary spec features z 3.2mmx1.6mm smt led,1.8mm thickness. z low power consumption. z wide viewing angle. z ideal for backlight and indicator. z package : 2000pcs / reel. z moisture sensitivity level : level 3. z rohs compliant. part number emitting color emitting material lens-color luminous intensity (if=20ma) mcd wavelength nm p viewing angle 2 1/2 min. typ. ZM2CR55W-3 red alingap water clear 3800 6490 640 50 absolute maximum ratings (t a =25c ) m2cr (alingap) unit reverse voltage v r 5 v forward current i f 30 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 150 ma power dissipation p t 84 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 m2cr (alingap) unit forward voltage (typ.) (i f =20ma) v f 2.2 v forward voltage (max.) (i f =20ma) v f 2.8 v reverse current (max.) (v r =5v) i r 10 ua wavelength of peak emission (typ.) (i f =20ma) p 640 nm wavelength of dominant emission (typ.) (i f =20ma) d 630 nm spectral line full width at half-maximum (typ.) (i f =20ma) ? 25 nm capacitance (typ.) (v f =0v, f=1mhz) c 27 pf operating characteristics (t a =25c ) notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.2(0.008") unless otherwise noted. 3. specifications are subjec t to change without notice.
published date : feb 23, 2008 drawing no : sdsa6224 v1 checked : b.l.l iu p.2/4 part number: ZM2CR55W-3 3.2x1.6mm smd chip led lamp www.sunled.com ? m2cr m2cr
published date : feb 23, 2008 drawing no : sdsa6224 v1 checked : b.l.l iu p.3/4 part number: ZM2CR55W-3 3.2x1.6mm smd chip led lamp www.sunled.com ? tape specification (units : mm) ? recommended soldering pattern (units : mm; tolerance: 0.1) ? the device has a single mounting surface. the device must be mounted according to the specifications. remarks: if special sorting is required (e.g. binn ing based on forward voltage, luminous intensity / luminous flux, or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters.
published date : feb 23, 2008 drawing no : sdsa6224 v1 checked : b.l.l iu p.4/4 part number: ZM2CR55W-3 3.2x1.6mm smd chip led lamp www.sunled.com packing & label specifications ZM2CR55W-3
|
